Showing 33–48 of 293 results
Blast Proof Doors
Boxes for Dry Riser Inlets
| S.No. | Model No. | Description | Dimension in mm (HxWxD) |
|---|---|---|---|
| 1 | NF-2WDRIC-SM | 4″ X 2 Way Box For Dry Riser Inlets, Surface Mounted, Horizontal | 595x395x295 |
| 2 | NF-4WDRIC-SM | 6″ X 4 Way Box For Dry Riser Inlets, Surface Mounted, Horizontal | 595x595x295 |
| 3 | NF-2WDRIC-SMA | 4″ X 2 Way Box For Dry Riser Inlets, Surface Mounted, Vertical | 395x595x295 |
| 4 | NF-2WDRIC-RT | 4″ X 2 Way Box For Dry Riser Inlets, Recessed Type | 595x395x295 |
| 5 | NF-4WDRIC-RT | 6″ X 4 Way Box For Dry Riser Inlets, Recessed Type | 595x595x295 |
| 6 | NF-2WDRIC-RTA | 4″ X 2 Way Box For Dry Riser Inlets, Recessed Type | 395x595x295 |
Bulldozer 9788
Bund Pourer
Busselton
CABLE TEST VAN – 138 KV
The HVT200, a compact and unique system, is the smaller and more affordable test van on the market to perform cable tests on assets with network volt-ages rated up to 138KV. The test van can perform quick and reliable cable fault location.
- Very Low Frequency (VLF) AC 0.1 Hz High Voltage Withstand Tests
- DC High Voltage Withstand Tests
- Insulation Resistance Testing
- Cable Fault Pre-Location
- Precise Cable Fault Acoustic Pinpointing
- Audio Frequency Cable Route Tracing and Depth Evaluation
- Cable Phase Identification
CABLE TEST VAN – 35 KV
The HVT-35 test van series provides a fully equipped system for cable testing and fault location on power cables rated up to 35 KV. An innovative modular test van with a diverse functionality the HVT-35 can perform a number of fundamental functions necessary for fault locations.
- Very Low Frequency (VLF) AC 0.1 Hz High Voltage Withstand Tests
- DC High Voltage Withstand Tests
- Burning Down of Defective Insulation
- Insulation Resistance Testing
- Cable Fault Pre-Location
- Precise Cable Fault Acoustic Pinpointing
- Audio Frequency Cable Route Tracing and Depth Evaluation
- Cable Phase Identification
CAF Handheld Backpack System
CAF System
Cash-In-Transit Vehicle
VEHICLE SUMMARY
CIT (Cash In Transit) vehicle built on Toyota L/C 79 is intended to provide secure transit over arduous or off road terrain with a payload of 400 kg+ and up to 4 crew members.
VEHICLE DETAIL
| Model | Toyota LC79 |
| Weight Table | |
|---|---|
| Front Axle | 1450 kg |
| Rear Axle | 2750 kg |
| GVW | 4200 kg |
Dimensions of Vehicle
| Wheelbase | 3180 mm |
| Overall height | 2400 mm |
| Width | 1830 mm |
| Length | 5370 mm |
FEATURE AND BENEFITS
- Armoured crew area accessed through a rear mounted door
- Separate cab area accessed through chassis cab doors
- Value area accessed through hinged bulkhead door
- Glazing is mounted using state of the art bonding processes.
- High ground clearance, maximum angle of approach and departure to accommodate operation on rough terrain
- The Protection level is up to B6
- The vehicle is equipped with different alarm push buttons and key access door systems, as well as Intercom and advanced control panel options
- Gun ports are mounted in the crew areas of the vehicle
- Wall Mounted Air conditioning evaporator linked to Toyota chassis condenser and compressor for comfort of rear crew
- Cab in-dash A/C
- We recommend the fitting of tracking and telematics systems, as well as CCTV, on the vehicle as external control systems
Certified Diesel Engine
Fire Driver diesel engines are specifically designed and manufactured for firefighting applications according to UL 1247 standard. Fire pump engines are required to start immediately based on the system demand signals without any hindrance and these engines have been consistently proven reliable in meeting this criterion. The better torque characteristics of these engines ensure reliable operation in emergency conditions.
These engines are UL listed and comply with the requirements for diesel engine drives as detailed in NFPA 20.
Certified Diesel Fire Pump Controllers
NAFFCO Microprocessor Based Fire Pump Diesel Engine Controller are listed by Underwriters Laboratories (UL file number EX15064), in accordance with UL 218 (Standard for Fire Pump Controller), UL 508a (Standard for Industrial Control Panel), NFPA 20 (National Fire Protection Association Pamphlet 20 – Standard for Centrifugal Fire Pumps), NFPA 70 (National Electric Code) and NEMA standards.
Also approved by FM approvals (Factory Mutual), in accordance with FM standard 1321 / 1323 (Standard for Fire Pump Controller).
Power ratings suitable for 12/24 volts DC operating voltage, 110 / 220 volts AC input voltage, 50/60 Hz. These controllers are compatible with most types of diesel engines used for fire pump applications.
Only high quality UL listed or UL recognized components are used in these panels to guarantee the best possible reliability. Also high quality UL listed enclosures are used.
This controller is completely wired, assembled and tested at the factory before shipment, and ready for immediate installation.
Certified Electric Fire Pump Controllers
NAFFCO Microprocessor Based Electric Motor Controllers for fire pumps are listed by Underwriters Laboratories (UL file number EX15064), in accordance with UL 218 (Standard for Fire Pump Controller), UL 508a (Standard for Industrial Control Panel), NFPA 20 (National Fire Protection Association Pamphlet 20- Standard for Centrifugal Fire Pumps), NFPA 70 (National Electric Code) and NEMA standards.
Also approved by FM approvals (Factory Mutual), in accordance with FM standard 1321 / 1323 (Standard for Fire Pump Controller).
Power ratings vary from 40 to 400 horsepower, 230 / 380 / 415 VAC, 50/60 Hz.
Only high quality UL listed or UL recognized components are used in these panels to guarantee the best possible reliability. Also high quality UL listed enclosures are used
This controller is completely wired, assembled, programmed and tested at the factory before shipment, and ready for immediate installation.
Certified End Suction Fire Pump
NAFFCO’s UL listed and FM approved fire pumps provide you with a reliable solution for your firefighting pump needs by combining the stringent quality measures of UL, FM and NFPA standards with our proven experience in the fire protection field.
We can offer you a complete package of services starting from engineering assistance to field start-up and periodic maintenance.
Each pump set is tested in our factory, prior to dispatch, as per UL, FM and NFPA standards. These pumps are covered by a warranty of one-year subject to standard terms and conditions.
Certified Fuel Tank
NAFFCO certified primary containment tank offers you a reliable solution for your fuel storage requirements. Design and fabrication of these tanks are done as per UL standard (UL 142), and installation and use shall be in accordance with NFPA 30.
Each tank is subjected to thorough structural inspections and leakage test as specified by the design standard. The tanks that successfully pass the inspection and test are labelled as per UL specifications confirming their UL certification.
These cylindrical, horizontally mounted, tanks are provided with necessary fittings and openings to facilitate quality service at field. All tanks are provided with openings for filling, connecting to diesel engine fuel system, fuel return line connection and drain.
Certified Horizontal Split Case Fire Pump
NAFFCO’s UL listed and FM approved fire pumps provide you with a reliable solution for your firefighting pump needs by combining the stringent quality measures of UL, FM and NFPA standards with our proven experience in the fire protection field.
We can offer you a complete package of services starting from engineering assistance to field start-up and periodic maintenance.
Each pump set is tested in our factory, prior to dispatch, as per UL, FM and NFPA standards. These pumps are covered by a warranty of one-year subject to standard terms and conditions.
