Good Contents Are Everywhere, But Here, We Deliver The Best of The Best.Please Hold on!
Data is Loading...
POSTS PORTFOLIO SEARCH SHOP
PORTFOLIO
SEARCH
SHOP
+234 (0) 803 326 4519

Browse Categories

Brands

Showing 273–288 of 293 results

Totally Enclosed Fan Cooled Motor

National Motors’ NM Series consists of motors designed for fire pump applications as specified in NFPA 20. These three-phase horizontal low-voltage squirrel-cage medium induction motors are constructed and manufactured as per the requirements of NEMA MG 1 standard Design B.

Totally Enclosed Fan Cooled Enclosures provide better protection and seals inner windings, contacts and bearings from outside environment including dust, airborne contaminants and many other weather disturbances.

 

Training Suits

Give responders the exact same experience as wearinga standard garment

Applications
Designed to be used and laundered multiple times, you get the extra benefit of significant cost-savings

Materials
• Fabric: World trust Z500 garments
• Face Shield: 40 mil PVC

 

TRANSFORMER TEST VAN

TransLAB5, the latest and most modern Transformer Test Van, is the ideal solution for substation commissioning and maintenance of power transformers. The multi-functional three-phase system cuts the testing time to a 3rd of the time when compared to conventional single phase systems. It provides insight into the condition of every part of a transformer with a number of  routine electrical tests.

  • Insulation resistance measurements
  • Automatic tangent delta(dissipation factor) and capacity measurements
  • DC winding resistance measurements and tap changer test
  • Turns ratio and vector group verification
  • Insulation diagnostic and moisture analysis
  • Short circuit impedance/leakage reactance measurements
  • Dielectric oil testing

Click here to download the catalogue

 

Type A Ambulance

The European standard EN1789 Type A ambulances are generally used for non-emergency transportation of patients and is limited in treatment or equipment space.

 

Type B Ambulance

The European standard EN1789 Type B are emergency ambulances and have a significantly large amount of medical equipment and treatment space.

 

Type C Ambulance

The European standard EN1789 Type C are mobile ICU ambulances that even accommodate critical hospital equipment like ventilators and resuscitators.

 
 

Type I Ambulance

CHASSIS
  1. Ford F-350 Chassis Cab Single Cabin 4X2
  2. 6.7L,Turbo Diesel V8 Engine
  3. 400hp @ 2800 rpm, Torque 800 lb-ft @ 1600 rpm
  4. 6 speed automatic, Wheelbase: 165″
  5. Dual Rear Tires, with ABS Break
  6. GVWR 12000 lbs, Model: 2013 with Ambulance pre-package, extendable mirrors.
EQUIPMENTS & FEATURES
  1. Mechanical slide-out loading platform.
  2. External cabinet for electrical service
  3. External cabinet with slide out tray for battery
  4. External cabinet for spare wheel
  5. External cabinet to accommodate : Foldable stretcher, Stair chair, scoop stretcher, spine board
  6. External cabinet for Oxygen cylinder.
  7. Medical cabinet
  8. Squad bench built to accommodate second patient
  9. EMPS seat slide and swivel type
  10. Assist handle on door entrance
  11. Safety net.
  1. Al chq plate on external cabinets and rear of vehicle.
  2. Built in vacuum system , 1 action area and 1 no on squad bench area
MEDICAL EQUIPMENT
  1. Automatic loading stretchers.
  2. Foldable stretcher
  3. Defibrillator
  4. Ventilator
  5. First aid kit
  6. Traction splint
  7. KED
  8. Trauma bag
  9. Emergency bag
  10. Medication Bag
  11. Hand sanitizer
  12. Blanket, pillow
  13. Spine board & Head immobilizer
  14. Scoop stretcher
  15. Foldable stretcher
  16. Gloves dispenser

Type II Ambulance

OTHER OPTIONS:
  1. Chevrolet Express Van, Petrol, Automatic
  2. Ford Econoline E-350 Van, Petrol, Automatic
  3. GMC Savana Extended Van, Petrol, Automatic
EQUIPMENTS & FEATURES
  1. Medical Cabinet
  2. Squad Bench
  3. Oxygen Cylinder
  4. EMSP Seat
  5. Camera System
  6. Additional A/C Patient Compartment
  7. Scoop Stretcher Storage
  8. Assist Handle
CHASSIS
  1. Light bar with PA system
  2. Warning Lights 360°
  3. Scene light on each side and rear
  4. Shore Line, Inverter and Charger
  5. Front Grill Lights and Intersection Lights
  6. LED Map reading Light
  7. Internal Lights with 48 Super Bright While LEDs
  8. Digital Clock 12Volts with Bright Red Digits
  9. Multiplexing system with multifunctional screen in driver cabin and LCD display in patient cabin.
  • Intercom system fully hands free
MEDICAL EQUIPMENT
  1. Automatic loading stretchers.
  2. Automatic Loading Stretcher
  3. Folding stretcher
  4. Stair Chair, Backboard
  5. Scoop Stretcher
  6. Traction Splint Kit
  7. Fracture Splint Kit
  8. Manual Suction Unit
  9. Portable Suction Unit
  10. Guedel Airway Kit
  11. BP Sphygmomanometer
  12. Head Immobilizer
  13. Ambu bag
  14. B-Vac Manual Aspirator
  15. Gloves Dispenser
  16. Isometric Sheet
  17. Built-in Suction Unit
  18. SED Extrication Device
  19. Blue Splint Kit
  20. First Aid Kit
  21. Burn Care Kit
  22. AED Philips FRX etc.
 

UL Listed Fire Retardant Coverall

Applications
Oil & Gas
Industries

Features
Tool Pocket: To the right shoulder
2 Chest Pockets, 2 Back Pockets, 2 Side Pockets
Extra tool Pocket to the Side of the Trouser area
Elasticized Stretchable Back Waist
Zipper covered with a Flap

Materials
93% Nomex, 5% Kevlar, 2% Anti Static
Quality stitching with Bar Tracks on stress areas

Colors
Dark Blue
Red
Yellow
Tan

 

Under Ground Hydrant

NAFFCO under ground fire hydrants are valves of screw down type and are suitable for a maximum working pressure of 16 bar.

The underground fire hydrants are manufactured to comply to BS 750:2012 and EN 14339:2005 standards with screwed outlet threaded to BS 336:2010 standard.

 

Unicus III

4 and 5 Stage High Pressure Breathing Air Compressor

Pressure: Up to 6000 psig | Up to 414 bar
Charging Rate: 9.7 to 42 cfm | 275 to 1190 l/min
Power: 7.5 to 30 hp | 5.6 to 22 kW

Available Accessories:
CO Monitor | 75” high Pressure Cabinet Enclosed Hose Reel | Additional Air Storage CylinderPanel mounted Remote Fill Hose Connection

*Perfect for Fire Department

USRX

Fire & Rescue Helmet, Urban Search & Rescue Operations

Certifications
NFPA 1971-2007, NFPA 1951-2001

Technical Specifications
• Dimensions 11.5” L x 11.6” W x 6.5” H
• Outer Shell material: Thermoplastic
• Inner Shell material: Nylon Impact Cap
• Suspension: 4 point Nylon Strap

Features
• M-Pact ™ Shell
• Sure-Lock® Ratchet Headband
• Nomex Ear/Neck protector
• Three-Point Chin Strap with postman’s Slide.
• ESS Googles or Optically Correct 4” Faceshield
• Quick-Attach Blade System
• Scotchlite Reflective Stripping
• Stainless Steel D Ring

 

Vertical Hollow Shaft Motor

National Motors’ NVHS Series consists of motors designed for fire pump applications as specified in NFPA 20 (Standard for the Installation of Stationary Pumps for Fire Protection).
 
They are certified by UL as per the requirement of UL 10045 ‘Standard for Fire Pump Motors’. These Vertical Hollow Shaft three-phase asynchronous motors are constructed and manufactured as per the requirements of NEMA MG 1 standard Design B.
 
The Weather Protected Type I Enclosure of these motors minimizes the entrance of rain and air-borne particles to the electric parts. Steel mesh screens are added to the enclosure at appropriate locations to further enhance the protection.
 

Vertical Multistage Jockey Pumps

JVS / JVSS is a vertical multistage pump series with all wetted parts made of stainless steel. It is suitable for a variety different applications involving various liquids from potable water to industrial effluent.

Pump is rigidly coupled to a totally enclosed fan-cooled motor with Class F insulation and IP 55 enclosure rating, suitable for 50 Hz or 60 Hz power supply.

Its high head low capacity performance range makes it especially suitable for using as pressure maintenance pump (jockey pump) in fire fighting applications and it meets NFPA 20 requirements for jockey pumps.

Verticus

TECHNICAL DATA

Compressor Block

Filling Pressure: 200 or/and 300 Bar
  1. Capacity: 450 l/m, Measured at bottle filling 0 to 200 bar, Tolerance -/+ 5% @ 20 °C Ambient temp.
  2. Speed: 1320 l/m
  3. No. of Compression Stage: 4
  4. No. of Cylinders: 4
  5. Drive: V-belt Driven

Prime Mover

  1. Type: Three Phase Electric Motor
  2. Power: 11 kW
  3. Speed: 2850 l/m
  4. Enclosure: IP55
  5. Operating Voltage: 400 V
  6. Frequency: 50 Hz

*Other voltages and frequencies available on request

 

 

VFR EVO

Fire Fighting Helmet

Certification
EN 443:2008

Technical Specifications
• Size: Cross Over
• Size Adjustment (52-64)
• Weight: Approx. 2.5 Kg.

Features
• Thermoplastic Outer Shell
• Polyurethane Foam with reinforced Molded Honeycomb + Aramid Outer Shell
• 4 point Adjustable Strap with Quick Buckle
• Internal Padding Headband
• Thermoplastic Face Shield
• Aluminized Textile, Impregnated Nomex and Combine Wool/Nomex

Danvic Safety Solutions International

Danvic Safety Solutions International is a Nigerian-owned safety equipment supply company, a one-stop resource for premium head-to-toe solutions and service.

About Us
 

CONTACT US

29A, Adetoro Adelaja Street, Off Emmanuel Keshi, Magodo, G.R.A. Phase 2, Shangisha, Lagos, Nigeria.

Phone: +234 (0) 803 326 4519

E-Mail: info@danvicsafetysolutions.com

 

SOCIALS

linkedin

Subscribe to our newsletter!

 

Browse Categories

Brands