Showing 145–160 of 293 results
INNO795
Inspection Mirror
INSULATED AERIAL ACCESS PLATFORMS
NAFFCO offers a wide range of Aerial Access Platforms for Line Maintenance, from 9m to 65m working heights. NAFFCO partners with world renowned partners to bring in the best in class technology as per ANSI Standards and manufactured in Dubai, UAE. These platforms fall under different categories like articulated non-over center, articulated over center, Telescopic and Articulates Telescopic Aerial platforms.
Our platforms meet ANSI Standards and are CE approved and are known as reliable, high quality products with low maintenance costs.
MAIN FEATURES OF AERIAL ACCESS PLATFORMS
- Achieves a redundant measure of security via the Dual Retention System on all cylinders and boom pins.
- Lower maintenance costs due to the use of non-lube bearings at all pivots.
- Boom play/maintenance time kept to a minimum with the fiberglass boom’s infinitely adjustable slide pads.
- Lubrication is simplified by having single grease fitting on the rotation bearing.
- Rust and corrosion protection is at its utmost because all components are painted prior to assembly.
- Operators can quickly and positively verify bolt torque by visually inspecting the torque seal markings.
- Machined rotation bearing mounted surfaces.
- Inside surfaces of each boom are pre-painted prior to assembly.
- Filament wound fiberglass booms.
- No mandatory rebuild periods required, aiding in reduced down times/lower overall maintenance costs.
- Multiple chassis options as per the lifting platform requirement.
- Easy access to maintenance and repairs.
INTERCEPTOR
Junior II E
K9 Vehicle
- Fabricated from heavy-duty aluminium for long-lasting durability.
- Special ventilation and air conditioning system.
- Washable floor and drying system.
- Electronic Siren with PA Amplifier and Speaker (100 W).
- Special cages fits up to 4 dogs.
- LED Light Bar on the Cabin Roof at the Front.
Kitchen Hood Wet Chemical Fire Suppression System
Kroflex 840
L-5 Plus
L-5R Plus
L3000
Lighting Vehicles
lighting up the emergency scene it enables firefighting and rescue operations at night. And, the on board generator mounted on the vehicle turns this vehicle into an emergency power source during power failures, long-term lighting solutions for emergency response and utility vehicles.
LIVE LINE INSULATOR WASHER
CONCEPT
When high voltage working Insulators are contaminated from the environment deposits such as sand, dirt, dust, salt, industrial smoke, cement, etc., it causes leakage of electric current with risk of flashover and thus consequent loss of supply. The best and only solution is to wash these insulators.
TECHNOLOGY
- With the CPSE (Constant Pressure and Separate Engine) system the normal tap water at high pressure is atomized and cleans the surface. The equipment fully complies with new edition of IEEE-957 / 2005 and provides compliance to IEC 61472 with minimum approach distances.
- State-of-art safety Technology implemented to prevent Flashover.
TECHNICAL SPECIFICATIONS
| Model | IW 265 |
| Rotation | 700° |
| Working Height | 67.0m (at nozzle outlet) |
| Rated Washing Point | 65.0m @ 20.00m |
| Horizontal Outreach | 25.0m (at nozzle output @ 45.0m height) |
| Maximum Gradient | 15% as per IEC |
| Maximum Slide Slope | 10% as per IEC |
| Stability Coefficient | >10% as per IEC |
| Water Tank Capacity | 7,000 – 10,000 liters |
| Water Flow | 240 liters/min |
| Water Pressure | 70 bar (Recommended for operation) |
| Mounted on | GVW 48t – 8×8 Heavy Duty |
LIVE LINE MAINTENANCE PLATFORM
NAFFCO-EGI has been manufacturing hydraulic insulated aerial platforms for many years for lower heights. Now developed higher range with foam filled boom as per IEC 1057 standard (European Standard).
CONCEPT
- Bare hands or potential working involves placing the technician in direct electrical contact with an energized overhead line. The technician will work alongside the lines from fully insulated platform. The technician works at the same potential (voltage) as of the line. (Equipotential condition with hot line that prevents flow of current through operator.)
- Equipment is dielectric tested at the best world laboratory.
TECHNOLOGY
“Foam Filled” Technology utilized in NAFFCO-EGI insulator booms is unique and integral to the performance of the latest state of the art booms. NAFFCO-EGI Type II foam filled technology: epoxide-resin reinforced by glass fiber tube filled by high density polyurethane foam (closed particles).Completely complying with IEC 1057 and succeeded to fulfil all types of tests as per section 3 of IEC 1057 specially:
- Test of penetration for humidity of the foam filled boom.
- Mechanical test for fatigue. (All electrical tests are carried out after fatigue test.)
- IEC 1057 Type Test up to 1,250,000V
TECHNICAL SPECIFICATIONS
| Model | T 65I |
| Rotation | 360° Continuous |
| Maximum Live-Working Height | 66.5m |
| Maximum Height | 65.0m |
| Maximum Horizontal Outreach | 22.5m |
| Rated Bucket Capacity | 500 daN (2 men + tools) |
| Insulation Safe Working Load | 500 kg |
| Insulation Rate | 765 kV |
| Mounted on | Various chassis options |
Lock Shield Valve
NAFFCO Lock Shield Valve is usually installed where unauthorized operation has to be avoided. A typical application of this valve is installing these at inlet pipe to the hose reel where it can be opened only by key and key kept by maintenance or fire safety department.