Showing 1–16 of 22 results
With years of experience and investment in continuous improvement, our new Vulcan II 3D design is the ultimate in offering unrestricted freedom of movement for firefighters. Optimal protection, combines with a garment that looks and feels good to allow the firefighter to do the job to the best of their abilities.
A PBi® outershell – the best UV protection of all PBi® fabrics – is protected by PBi Gold, reducing UV degradation and improving break open performance. It is supple and flexible, it won’t shrink or become brittle, nor melt or break open after thermal exposure. Overall, PBi® provides exceptional heat and flame protection, comfort and durability.
Underneath our new high performance liner and membrane system is a unique world patented solution which reduces weight and heat stress whilst maximising protection.
Features
- 39% lighter, reducing heat stress
- ÖKotex Class 2 for direct skin contact
- Spacetec® 3D spacer technology reduces heat build up, provides consistent air circulation and high moisture transfer
- Comfort cushioning, chock absorbency and excellent recovery
- Perforated reflective tape improves breathability and reduces weight
- Drag rescue device (DRD) is included in the jacket, with the liner detachable for ease of inspection
- Comfort brace and lumbar support on salopettes
This design provides the wearer with a unique combination of exceptional comfort and minimal bulk. The suit itself is manufactured using 206gms PBI, in conjunction with a PTFE membrane, ISOAIR/NOMEX® Comfort liner and Stedshield reinforcement.
Features
IND01 Jacket
- Panelled front with full storm guard concealing zip and VELCRO® centre fastening
- Raglan sleeve combined with full underam gusset for freedom of movement
- Reinforced shoulder and elbows for excessive wear and tear
- Radio pocket to left chest area with VELCRO® fastening flap
- Torch loop to right chest area with retainer tab
- VELCRO® Brand name attachment to above torch loop
- Two lower hip internal pockets with VELCRO® fastening flaps
- Two vertical internal napoleon pockets accessed from under storm guard
- Integrated thumb loops in ribbed cuff
- Ergonomic elbows to allow freedom of movement and reduce bulk
- Full collar with adjustable tab to ensure full neck coverage
- Back hem shaped to allow maximum overlap with trouser
- 2 x 50mm reflective tape around torso and sleeves
- Provides viral penetration resistance as per ASTM F1671
IND02 Trousers
- Over-trouser with centre front concealed zip fastening
- Covered with storm guard with VELCRO® Brand fastening
- Ergonomic legs to allow ease of movement and reduce bulk when knelt
- Two side cargo pockets with VELCRO® Brand fastening flaps
- Side waist adjusters to reduce waist for a comfortable fit without compromising airflow
- Increased back waist height to ensure full coverage to lumbar region
- Fully adjustable and detachable elastic braces
- H bar is also adjustable
- Two rows of 50mm reflective tape to lower legs
- Reinforced and padded knee area
- Notched to minimise bulk
- Back hem scalloped to reduce wear and tear
Constructed with PBi® Matrix outershell, PTFe membrane and an innovative thermal liner called IsoAir.
The outershell gives superior tear and tensile strength with no risk of break open. With the FC finish, PBi® Matrix offers exceptional protection against a multitude of petro-chemical based hazards. IsoAir is a lightweight thermal barrier offering optimal thermal performance whilst enhancing breathability.
Features
- Elasticated back panel with adjustable side tabs on salopettes
- Bellowed pockets with Velcro® Brand flaps on jacket
- Easy open Velcro® Brand storm guard with two Napoleon pockets and whistle loop on jacket
The Eagle ETF20HVNM hood features notched shoulders and a longer length bib, providing extra chest protection and ensuring it stays tucked into other equipment.
Features
- Innovative design to ensure seams are comfortable
- Two layers of fabric throughout
- Elasticated face opening
- Designed to work alongside other PPE
- The fabric features a rib design for additional comfort and stretch using warp knitting techniques for superior fit
The Eagle ETF6HVNM hood features a full shoulder design to allow the hood to be tucked under the fire trouser braces. This design ensures a proper fit and added protection across the shoulders.
Features
- Innovative design to ensure seams are comfortable
- Double layer fabric on head for extra protection
- Elasticated face opening
- Single layer extanded bib for extra protection
- Designed to work alongside other PPE and sits comfortably under shoulder braces
- The fabric features a rib design for additional comfort and stretch using warp knitting techniques for superior fit
The Eagle ETF8PBI offers a nonelastic face opening and half shoulder design to minimise the wearers risk of heat exhaustion.
Features
- Innovative design to ensure that the seams are comfortable
- Non-elasticated face opening
- Designed to work alongside other PPE
- The fabrics are designed in a rib design for additional comfort and stretch using a warp knitted fabric and shows superior fit and comfort
The Eagle ETF2HVNM hood features notched shoulders and longer length which ensures a proper fit and added protection across the chest.
Features
- Innovative design to ensure seams are comfortable
- Two layers of fabric throughout
- Elasticated face opening
- Designed to work alongside other PPE
- The fabric features a rib design for additional comfort and stretch using warp knitting techniques for superior fit
These firefighting gloves are manufactured using Cowhide 100% top grain leather, 1.1-1.2 thickness. This material is dye fast, water & chemical resistant. The inner lining is warp knitted, 100% Dupont Kevlar, tested & approved to EN388, this works in conjunction with the PU waterproof inner membrane. In terms of cuffing, we have used an undyed Nomex/Kevlar blend, in a rib construction. We have added a small percentage of elastane for additional grip to the wrist and shape recovery. The fingers, palm and knuckles are all reinforced for extra durability. The thread use is 100% Kevlar.
Features
- The outer shell is a pre curved hand and finger shape, for added comfort, better dexterity, and less hand fatigue
- Inset thumb to ensure tunic compatibility
- The waterproof membrane is heat bonded to a Kevlar knitted lining, the membrane is then sewn into the tops of each finger and the thumb to ensure no pull-out and 100% lining retention
- The cuffing is double folded for added protection to the wrist area, all with double sewn seams
- The high density stitch counts 5-6 stitches per cm to help keep hand shape, with double stitching on all re-enforcement areas
These firefighting gloves are manufactured using Cowhide 100% top grain leather, 1.1-1.2 thickness. This material is dye fast, water & chemical resistant. The inner lining is warp knitted, 100% Dupont Kevlar, tested & approved to EN388, this works in conjunction with the PU waterproof inner membrane. In terms of cuffing, we have used an undyed Nomex/Kevlar blend, in a rib construction. We have added a small percentage of elastane for additional grip to the wrist and shape recovery. The fingers, palm and knuckles are all reinforced for extra durability. The thread use is 100% Kevlar.
Features
- The outer shell is a pre curved hand and finger shape, for added comfort, better dexterity, and less hand fatigue
- Inset thumb to ensure tunic compatibility
- The waterproof membrane is heat bonded to a Kevlar knitted lining, the membrane is then sewn into the tops of each finger and the thumb to ensure no pull-out and 100% lining retention
- The cuffing is double folded for added protection to the wrist area, all with double sewn seams
- The high density stitch counts 5-6 stitches per cm to help keep hand shape, with double stitching on all re-enforcement areas
Constructed with NOMEX® Delta T outershell – a highly durable fabric, giving excellent tensile and abrasion resistance. NOMEX® offers outstanding strength throughout the wear life, maintaining its dimensional stability. Even after 200 washes, the material retains its appearance and the colour remains stable. The FC finish is an excellent repellent of oil and water, while the quilted liner provides high thermal protection.
Features
ETF2012NDTA-2 Jacket
- Panelled front with full storm guard concealing panic zip and VELCRO® Brand centre fastening
- Raglan sleeve with underarm gusset for ease of movement
- Kevlar® padded elbows and shoulder for added comfort
- Two vertical internal napoleon pockets accessed from under storm guard
- Full collar with adjustable throat tab to ensure full neck coverage
- Radio pocket to both chest areas with VELCRO® Brand fastening flaps
- Lower patch hip pockets with VELCRO® Brand fastening flaps with grasp tabs
- Ribbed cuffs with thumb loops and adjustable sleeve cuffs
- Two bands of 50mm yellow, silver, yellow reflective tape around chest and lower hem and vertical strips up back of jacket.
ETF2018NDTA Trousers
- Fire trouser with front fastening zip fly covered with VELCRO® Brand fastening storm guard
- Two bellowed cargo leg pockets with VELCRO® Brand fastening flaps
- Full height back waist to ensure full coverage to lumber region and elasticated waist for extra comfort
- Fully adjustable and detachable elastic braces
- One band reflective tape around lower legs and vertical strip up back leg
- Kevlar® padded knee area for extra protection
- Gusseted crotch for extra movement
This fire suit has been designed for structural and external firefighting. This design provides the wearer with a unique combination of exceptional comfort and minimal bulk. The suit itself is manufactured using Nomex, in conjunction with a PTFE membrane.
Features
ETF2030 Jacket
- Panelled front with full storm guard concealing zip and VELCRO® Brand centre fastening
- Raglan sleeve combined with full underarm gusset for freedom of movement
- Padded elbows and shoulder for added comfort
- Radio pocket to left chest area with VELCRO® Brand fastening flap
- Double torch loop to right chest area with retainer tab
- Two vertical internal napoleon pockets accessed from under storm guard
- Ribbed cuff with integrated thumb loops
- Full collar with adjustable tab to ensure full neck coverage
- 2 x 50mm reflective tape around torso, single lower sleeve tape and 2 x 50mm vertical stripes to back body
ETF2031 Trousers
- Over-trouser with centre front concealed zip fastening. Covered with storm guard with VELCRO® Brand fastening
- 3/4 Elasticated waist
- Ergonomic legs to allow ease of movement and reduce bulk when knelt
- Two side cargo pockets with VELCRO® Brand fastening flaps
- Fully adjustable and detachable elastic braces
- Single rows of 50mm reflective tape to lower legs, and single outside leg tape extending from lower stripe to pocket
- Reinforced and padded knee area
- Bound arashield hems to reduce wear and tear
This fire suit has been designed for structural and external firefighting. This design provides the wearer with a unique combination of exceptional comfort and minimal bulk. The suit itself is manufactured using Nomex, in conjunction with a PTFE membrane.
Features
ETF2030OR Jacket
- Panelled front with full storm guard concealing zip and VELCRO® Brand centre fastening
- Raglan sleeve combined with full underarm gusset for freedom of movement
- Padded elbows and shoulder for added comfort
- Radio pocket to left chest area with VELCRO® Brand fastening flap
- Double torch loop to right chest area with retainer tab
- Two vertical internal napoleon pockets accessed from under storm guard
- Ribbed cuff with integrated thumb loops
- Full collar with adjustable tab to ensure full neck coverage
- 2 x 50mm reflective tape around torso, single lower sleeve tape and 2 x 50mm vertical stripes to back body
ETF2031 Trousers
- Over-trouser with centre front concealed zip fastening. Covered with storm guard with VELCRO® Brand fastening
- 3/4 Elasticated waist
- Ergonomic legs to allow ease of movement and reduce bulk when knelt
- Two side cargo pockets with VELCRO® Brand fastening flaps
- Fully adjustable and detachable elastic braces
- Single rows of 50mm reflective tape to lower legs, and single outside leg tape extending from lower stripe to pocket
- Reinforced and padded knee area
- Bound arashield hems to reduce wear and tear
Features
ETF2012S Jacket
- Panelled front with full storm guard concealing zip and Velcro Brand centre fastening
- Raglan sleeve combined with full underam gusset in red for freedom of movement
- Reinforced shoulder and elbows for excessive wear and tear
- Radio pockets to left & right chest area with Velcro® Brand fastening flap
- Two lower hip internal pockets with Velcro® Brand fastening flaps
- One vertical internal napoleon pockets accessed from under stormguard
- Integrated thumb loops in ribbed cuff
- Ergonomic elbows to allow freedom of movement and reduce bulk
- Full collar with adjustable tab to ensure full neck coverage
- Back hem shaped to allow maximum overlap with trouser
- 2 x 75mm reflective tape around torso and sleeves. 2 x 75mm vertical stripes on back panel
ETF2018S Trousers
- Over-trouser with centre front concealed zip fastening covered with storm guard with Velcro® Brand fastening
- Ergonomic legs to allow ease of movement and reduce bulk when knelt
- Two side cargo pockets with Velcro® brand fastening flap
- Side waist adjusters to reduce waist for a comfortable fit without compromising airflow
- Increased back waist height to ensure full coverage to lumbar region
- Fully adjustable and detachable elastic braces
- H bar is also adjustable
- Two rows of 75mm reflective tape to lower legs and vertical stripe up legs
- Reinforced and padded knee area notched to minimise bulk
- Back hem scalloped to reduce wear and tear
Constructed with NOMEX® Tough Diamond outershell, PTFe membrane and quilted Arafelt thermal liner.
NOMEX® Tough Diamond offers excellent tear and abrasion resistance and tensile strength thanks to its unique weave. Complete with NOMEX® natural dimension stabilityand colourfastness which helps to retain appearance. An FC finish makes the suit oil and water repellent whilst the Arafelt thermal liner offers ultimate thermal performance.
Features
- Fully adjustable and detachable braces on the salopettes
- Adjustable radio pocket with Velcro® Brand fastening flap
- Full bellowed pocket with lower drainage holes and Velcro® Brand fastening flap
A highly advanced durable lightweight system with Kevlar DRD.
Ergonomically designed to enhance user comfort and movement in the toughest of conditions. The Eagle design is tailored to reduce restriction and be less bulky. High quality, European made product featuring double stitched seams. PTFe membrane.
Features
- Fully adjustable comfort shoulder braces on salopettes
- Integrated DRD system
- Ergonomic notched knee with reinforced and padded front knee
Unique NOMEX® outershell minimises penetration, moisture absorption and wetting, preventing weight increase and helping to reduce heat stress.
Features
- PTFe membrane
- Quilted lining
- Velcro® Brand storm guard fastening with clasp
- Available with carabineer to front jacket panel and/or salopettes
- Extended thumb loop to ribbed cuffs